Card clothing is one of the most heavily loaded consumable items in the spinning line, and its condition is directly reflected in yarn quality, nep level and waste figures. Plants that follow disciplined maintenance practices routinely run cylinder wire longer while keeping carding quality stable. The difference rarely comes from the wire itself, but from how it is handled every day.Daily and periodic practices set the baseline. Keep a consistent production record for each card, tracking sliver
Needle roller performance on a high speed carding line is decided long before installation. Wire gauge, needling density and the hardness of the base tube together determine how the roller behaves at elevated rpm, and a mismatch shows up quickly as fibre damage, vibration or shortened service life.The first choice is needle density against fibre type. Fine denier fibre needs a higher needling density with a smaller wire diameter so that fibres are opened without being cut, while coarse or recycl
If human beings want to achieve a series of basic activities, such as living, working, and studying, they must rely on their own organs. Apart from the brain, the most important thing is our eyes. (Industrial) robots are no exception. To complete normal production tasks, it is difficult to imagine without a complete and advanced visual system.Machine vision systems use machines instead of human eyes to make various measurements and judgments. It is an important branch of computing. It integrates
Correct maintenance of the apron can keep the quality of the apron in good condition. When the apron is in operation, the fibers affected by the drawing force constantly rub against the surface of the apron, and between the roller and the inner layer of the apron. After a period of use, surface roughness, grooves, damage, and fiber impurity sticking will appear, resulting in an increase in the friction factor on the surface of the apron, thus destroying normal drafting. Therefore, the apron must